CISCOCABLESPECTRUMMIB

Children

class ydk.models.cisco_ios_xe.CISCO_CABLE_SPECTRUM_MIB.CISCOCABLESPECTRUMMIB

Bases: Entity

Class Hierarchy : CISCOCABLESPECTRUMMIB

This class represents state data.

ccsflapobjects

type: CcsFlapObjects

config: False

ccsflaptable

This table keeps the records of modem state changes. It can be used to identify the problematic cable modems. An entry can be deleted from the table but can not be added to the table

type: CcsFlapTable

config: False

status: deprecated

ccscmflaptable

This table keeps the records of modem state changes, so it can be used to identify the problematic cable modems. An entry per modem is added to the table automatically by the system when it detects any state changes to the modem. Therefore, it can be deleted but can not be added by the management system

type: CcsCmFlapTable

config: False

ccsspectrumrequesttable

This table contains the spectrum data requests. There are two types of request: background noise and SNR. Refer to ccsSpectrumRequestIfIndex and ccsSpectrumRequestMacAddr DESCRIPTIONS on how the type of request is determined

type: CcsSpectrumRequestTable

config: False

ccsspectrumdatatable

This table contains the receiving power or background noise measurement based on the criteria that is set in the ccsSpectrumRequestEntry

type: CcsSpectrumDataTable

config: False

ccssnrrequesttable

A table of CNR requests

type: CcsSNRRequestTable

config: False

ccsupinspecgrouptable

This table contains the cable upstream interfaces assigned to a spectrum group. A spectrum group contains one or more fixed frequencies or frequency bands which can be assigned to cable upstream interfaces in the spectrum group

type: CcsUpInSpecGroupTable

config: False

ccsupinfibernodetable

This table contains the cable upstream interfaces in a fiber-node.Each fiber-node uniquely represents an RF domain.Cable upstream interfaces in the same fiber-node are physically combined together into the same RF domain

type: CcsUpInFiberNodeTable

config: False

ccsupspecmgmttable

This table contains the attributes of the cable upstream interfaces, ifType of docsCableUpstream(129), to be used for improving performance and proactive hopping. Proactive hopping is achieved by setting the SNR polling period over the in-use band without CM signals

type: CcsUpSpecMgmtTable

config: False

ccsspecgroupfreqtable

This table contains the frequency and band configuration of the spectrum group

type: CcsSpecGroupFreqTable

config: False