DynamicTemplateType

class ydk.models.cisco_ios_xe.CISCO_DYNAMIC_TEMPLATE_TC_MIB.DynamicTemplateType

DynamicTemplateType (Enum Class)

An enumerated integer-value describing the type of dynamic

template:

‘other’

The implementation of the MIB module using this textual

convention does not recognize the type of dynamic template.

‘derived’

A configuration resulting from the union of the attributes

contained by all the dynamic templates associated with a

target. The system generates a derived configuration, and

an EMS/NMS cannot directly modify it. An EMS/NMS can only

affect a derived configuration by modifying one or more of

the dynamic templates associated with the target.

‘ppp’

A PPP template is a set of locally-configured attributes

relating to the configuration of a PPP interface.

‘ethernet’

An Ethernet template is a set of locally-configured

attributes used by the system to configure dynamic

interfaces initiated on Ethernet virtual interfaces (e.g.,

EoMPLS) or automatically created VLANs.

‘ipSubscriber’

An IP subscriber template is a set of locally-configured

attributes used by the system to configure certain types of

IP and L2 subscriber sessions.

‘service’

A service template is a set of locally-configured attributes

used by the system to configure subscriber sessions. These

attributes specifically relate to services, and the system

applies these attributes in response to subscriber session

life-cycle events.

other = 1
derived = 2
ppp = 3
ethernet = 4
ipSubscriber = 5
service = 6