CCSRequestOperState

class ydk.models.cisco_ios_xe.CISCO_CABLE_SPECTRUM_MIB.CCSRequestOperState

CCSRequestOperState (Enum Class)

The CCSRequestOperState is used to represent the current test

status.

It has the following defined values:

- ‘idle’, which indicates the test has not been initiated;

- ‘pending’, which indicates the test is in the pending queue;

- ‘running’, which indicates the test is in process;

- ‘noError’, which indicates the test has completed

without error;

- ‘aborted’, which indicates the test was stopped

before the test was completed;

- ‘notOnLine’, which indicates the Mac Address

is not online;

- ‘invalidMac’, which indicates the Mac Address

is not valid;

- ‘timeOut’, which indicates timeout has occurred while

receiving data from DSP;

- ‘fftBusy’, which indicates the FFT is busy;

- ‘fftFailed’, which indicates the FFT is failed due to

a hardware problem;

- ‘others’, other errors;

idle = 0
pending = 1
running = 2
noError = 3
aborted = 4
notOnLine = 5
invalidMac = 6
timeOut = 7
fftBusy = 8
fftFailed = 9
others = 10