IANAtunnelType

class ydk.models.cisco_ios_xe.IANAifType_MIB.IANAtunnelType

IANAtunnelType (Enum Class)

The encapsulation method used by a tunnel. The value

direct indicates that a packet is encapsulated

directly within a normal IP header, with no

intermediate header, and unicast to the remote tunnel

endpoint (e.g., an RFC 2003 IP-in-IP tunnel, or an RFC

1933 IPv6-in-IPv4 tunnel). The value minimal indicates

that a Minimal Forwarding Header (RFC 2004) is

inserted between the outer header and the payload

packet. The value UDP indicates that the payload

packet is encapsulated within a normal UDP packet

(e.g., RFC 1234).

The values sixToFour, sixOverFour, and isatap

indicates that an IPv6 packet is encapsulated directly

within an IPv4 header, with no intermediate header,

and unicast to the destination determined by the 6to4,

6over4, or ISATAP protocol.

The remaining protocol-specific values indicate that a

header of the protocol of that name is inserted

between the outer header and the payload header.

The assignment policy for IANAtunnelType values is

identical to the policy for assigning IANAifType

values.

other = 1
direct = 2
gre = 3
minimal = 4
l2tp = 5
pptp = 6
l2f = 7
udp = 8
atmp = 9
msdp = 10
sixToFour = 11
sixOverFour = 12
isatap = 13
teredo = 14