Dot3TestTdr

class ydk.models.cisco_ios_xe.EtherLike_MIB.Dot3TestTdr

Bases: Entity, Identity, ObjectIdentity

This class represents configuration data.

******** THIS IDENTITY IS DEPRECATED *******

The Time-Domain Reflectometry (TDR) test is

specific to ethernet-like interfaces of type

10Base5 and 10Base2. The TDR value may be

useful in determining the approximate distance

to a cable fault. It is advisable to repeat

this test to check for a consistent resulting

TDR value, to verify that there is a fault.

A TDR test returns as its result the time

interval, measured in 10 MHz ticks or 100 nsec

units, between the start of TDR test

transmission and the subsequent detection of a

collision or deassertion of carrier. On

successful completion of a TDR test, the result

is stored as the value of an appropriate

instance of an appropriate vendor specific MIB

object, and the OBJECT IDENTIFIER of that

instance is stored in the appropriate instance

of the appropriate test result code object

(thereby indicating where the result has been

stored).

This object identity has been deprecated, since

the ifTestTable in the IF-MIB was deprecated,

and there is no longer a standard mechanism for

initiating an interface test. This left no

standard way of using this object identity.