CISCODOCSEXTMIB

Children

class ydk.models.cisco_ios_xe.CISCO_DOCS_EXT_MIB.CISCODOCSEXTMIB

Bases: Entity

Class Hierarchy : CISCODOCSEXTMIB

This class represents state data.

cdxcmtscmcpeobjects

type: CdxCmtsCmCpeObjects

config: False

cdxwbresilobjects

type: CdxWBResilObjects

config: False

cdxcmtsdocsislbobjects

type: CdxCmtsDocsisLBObjects

config: False

cdxqosctrluptable

For each upstream interface, this table maintains a number of objects related to Quality of Service scheduler which uses these attributes to control cable modem registration.

type: CdxQosCtrlUpTable

config: False

cdxqosifratelimittable

This table describes the attributes of rate limiting for schedulers in cable upstream and downstream interfaces that support Quality of Service. The rate limiting process is to ensure the Quality of Service and fairness.

type: CdxQosIfRateLimitTable

config: False

cdxcmtsserviceexttable

The list contains the additional attributes of a single Service ID that provided by docsIfCmtsServiceEntry.

type: CdxCmtsServiceExtTable

config: False

cdxupinfoelemstatstable

The table contains the attributes of a particular Information Element type for each instance of the MAC scheduler. It is indexed by upstream ifIndex. An Entry exists for each ifEntry with ifType of docsCableUpstream(129) Since each upstream has an instance of a MAC Scheduler so this table has the per MAC scheduler slot information on a per Information Element basis.

type: CdxUpInfoElemStatsTable

config: False

cdxbwqueuetable

This table describes the attributes of queues in cable interfaces schedulers that support Quality of Service

type: CdxBWQueueTable

config: False

cdxcmcpetable

This table contains information about cable modems (CM) or Customer Premises Equipments (CPE).

type: CdxCmCpeTable

config: False

cdxcmtscmstatusexttable

The list contains the additional CM status information.

type: CdxCmtsCmStatusExtTable

config: False

cdxcmtsmacexttable

This table contains the additions attributes of a CMTS MAC interface that provided by docsIfCmtsMacTable.

type: CdxCmtsMacExtTable

config: False

cdxcmtscmchovertable

A table of CMTS operation entries to instruct cable modems to move to a new downstream and/or upstream channel. An entry in this table is an operation that has been initiated from CMTS to generates downstream frequency and/or upstream channel override fields in the RNG-RSP message sent to a cable modem. A RNG-RSP message is sent to a cable modem during initial maintenance opportunity. This operation causes the uBR to place an entry for the cable modem specified into the override request queue. The link is then broken by deleting the modem from its polling list. When the modem attempts initial ranging, the override request causes downstream frequency and upstream channel override fields to be inserted into the RNG-RSP message.

type: CdxCmtsCmChOverTable

config: False

cdxcmtscmtable

This table contains attributes or configurable parameters for cable modems from a CMTS.

type: CdxCmtsCmTable

config: False

cdxcmtscmstatusdmictable

This table contains the list of modems which failed the CMTS Dynamic Message Integrity Check (DMIC). The modems are either Marked: The modems failed the DMIC check but were still allowed to come online. Locked: The modems failed the DMIC check and hence were allowed to come online with a restrictive QoS profile as defined in cdxCmtsCmDMICLockQos. Rejected: The modems failed the DMIC check and hence were not allowed to come online. Another objective of the objects in this table is to clear the lock on the modems

type: CdxCmtsCmStatusDMICTable

config: False

cdxcmtocpetable

This table contains information about CPE connects behind cable modem. It will return IP address and IP address type of each CPE connect to a CM. It is not intended to walk the whole table. An application would need to query this table based on the specific indices. Otherwise, it will impact the CMTS performance due to the huge size of this table. The agent creates/destroys/modifies an entry whenever there is a CPE connect to a cable modem or disconnect from a cable modem

type: CdxCmToCpeTable

config: False

cdxcpetocmtable

This table contains information about cable modems with CPE connects to. It is not intended to walk the whole table. An application would need to query this table base on the specific index. Otherwise, it will impact the CMTS performance due to the huge size of this table. The agent creates/destroys/modifies an entry whenever there is update for the cable modem that CPE connects to

type: CdxCpeToCmTable

config: False

cdxcpeipprefixtable

The table contains a list CPE’s IP Prefix management information

type: CdxCpeIpPrefixTable

config: False

cdxifupstreamchannelexttable

This table contains upstream channel attributes for automated Spectrum management, in addition to the ones provided by docsIfUpstreamChannelEntry. It also contains upstream channel attributes to count the number of active,registered and total number of cable modems on this upstream.

type: CdxIfUpstreamChannelExtTable

config: False

cdxwbresilcmtable

This table contains information about partial service cable modems (CM), including both downstream and upstream partial service modems

type: CdxWBResilCmTable

config: False

cdxrftoprimarychannelmappingtable

This table contains information of the mapping of the physical RF channels to the primary RF channels

type: CdxRFtoPrimaryChannelMappingTable

config: False

cdxprimarychanneltorfmappingtable

This table contains information of the mapping of the primary RF channels to the physical RF channels

type: CdxPrimaryChanneltoRFMappingTable

config: False

cdxcmtsmtccmtable

This table contains CM management information of Transmit Channel Set(TCS) in the system

type: CdxCmtsMtcCmTable

config: False

cdxcmtsuscbsflowtable

This table contains the Upstream Channel Bonding Service Flow management information

type: CdxCmtsUscbSflowTable

config: False

cdxrpdgs7ktable

The cdxRPDGS7KTable contains the attributes of GS7K. An Entry exists for each instance. It is indexed by GS7K’s MacAddress

type: CdxRPDGS7KTable

config: False

cdxbundleiphelpertable

A list of cable helper entries on Bundle/Sub-Bundle interface

type: CdxBundleIpHelperTable

config: False

cdxbundleipv6dhcprelaytable

Ipv6 dhcp relay configurations on Bundle/Sub-Bundle interface

type: CdxBundleIPv6DHCPRelayTable

config: False

cdxbundleipv6dhcprelaydesttable
A list of IPv6 DHCP relay destination entries on Cable Bundle/Sub-Bundle interfaces

type: CdxBundleIPv6DHCPRelayDestTable

config: False