DS3MIB

Children

class ydk.models.cisco_ios_xe.DS3_MIB.DS3MIB

Bases: Entity

Class Hierarchy : DS3MIB

This class represents state data.

dsx3configtable

The DS3/E3 Configuration table

type: Dsx3ConfigTable

config: False

dsx3currenttable

The DS3/E3 current table contains various statistics being collected for the current 15 minute interval

type: Dsx3CurrentTable

config: False

dsx3intervaltable

The DS3/E3 Interval Table contains various statistics collected by each DS3/E3 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by dsx3IntervalNumber) and for one specific interface (identifed by dsx3IntervalIndex)

type: Dsx3IntervalTable

config: False

dsx3totaltable

The DS3/E3 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval

type: Dsx3TotalTable

config: False

dsx3farendconfigtable

The DS3 Far End Configuration Table contains configuration information reported in the C-bits from the remote end

type: Dsx3FarEndConfigTable

config: False

dsx3farendcurrenttable

The DS3 Far End Current table contains various statistics being collected for the current 15 minute interval. The statistics are collected from the far end block error code within the C- bits

type: Dsx3FarEndCurrentTable

config: False

dsx3farendintervaltable

The DS3 Far End Interval Table contains various statistics collected by each DS3 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals

type: Dsx3FarEndIntervalTable

config: False

dsx3farendtotaltable

The DS3 Far End Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval

type: Dsx3FarEndTotalTable

config: False

dsx3fractable

This table is deprecated in favour of using ifStackTable. Implementation of this table was optional. It was designed for those systems dividing a DS3/E3 into channels containing different data streams that are of local interest. The DS3/E3 fractional table identifies which DS3/E3 channels associated with a CSU are being used to support a logical interface, i.e., an entry in the interfaces table from the Internet- standard MIB. For example, consider a DS3 device with 4 high speed links carrying router traffic, a feed for voice, a feed for video, and a synchronous channel for a non-routed protocol. We might describe the allocation of channels, in the dsx3FracTable, as follows: dsx3FracIfIndex.2. 1 = 3 dsx3FracIfIndex.2.15 = 4 dsx3FracIfIndex.2. 2 = 3 dsx3FracIfIndex.2.16 = 6 dsx3FracIfIndex.2. 3 = 3 dsx3FracIfIndex.2.17 = 6 dsx3FracIfIndex.2. 4 = 3 dsx3FracIfIndex.2.18 = 6 dsx3FracIfIndex.2. 5 = 3 dsx3FracIfIndex.2.19 = 6 dsx3FracIfIndex.2. 6 = 3 dsx3FracIfIndex.2.20 = 6 dsx3FracIfIndex.2. 7 = 4 dsx3FracIfIndex.2.21 = 6 dsx3FracIfIndex.2. 8 = 4 dsx3FracIfIndex.2.22 = 6 dsx3FracIfIndex.2. 9 = 4 dsx3FracIfIndex.2.23 = 6 dsx3FracIfIndex.2.10 = 4 dsx3FracIfIndex.2.24 = 6 dsx3FracIfIndex.2.11 = 4 dsx3FracIfIndex.2.25 = 6 dsx3FracIfIndex.2.12 = 5 dsx3FracIfIndex.2.26 = 6 dsx3FracIfIndex.2.13 = 5 dsx3FracIfIndex.2.27 = 6 dsx3FracIfIndex.2.14 = 5 dsx3FracIfIndex.2.28 = 6 For dsx3M23, dsx3 SYNTRAN, dsx3CbitParity, and dsx3ClearChannel there are 28 legal channels, numbered 1 throug h 28. For e3Framed there are 16 legal channels, numbered 1 through 16. The channels (1..16) correspond directly to the equivalently numbered time-slots

type: Dsx3FracTable

config: False

status: deprecated