SubSessionIdentity

class ydk.models.cisco_ios_xe.CISCO_SUBSCRIBER_IDENTITY_TC_MIB.SubSessionIdentity

SubSessionIdentity (Enum Class)

An enumerated integer-value describing a subscriber session

identity:

‘other’

The implementation of the MIB module using this textual

convention does not recognize the subscriber session

identity.

‘ifIndex’

The ifIndex assigned to the interface representing the

subscriber session.

‘subscriberLabel’

The arbitrary integer-value assigned by the system

to uniquely identify the subscriber session within the

scope of the system.

‘macAddress’

The subscriber’s MAC address.

‘nativeVrf’

The name of the VRF on which the subscriber session

originates.

‘nativeIpAddress’

The IP address assigned to the subscriber session on

the

customer-facing side of the system.

‘domainVrf’

The name of the VRF to which the system transfers the

subscriber session traffic.

‘domainIpAddress’

The IP address assigned to the subscriber session on

the

service-facing side of the system.

‘pbhk’

The Port-Bundle Host Key (PBHK) uniquely identifying

the

subscriber session. A PBHK consists of a source IP

address and a TCP port number.

‘remoteId’

The name identifying the ‘calling station’, access

multiplexor, or access switch providing access to the

subscriber.

‘circuitId’

The name identifying the circuit on the ‘calling

station’, access multiplexor, or access switch that

provides access to the subscriber.

‘nasPort’

An octet string identifying the port on the Network

Access Server (NAS) that provides access to the

subscriber.

‘domain’

The subscriber’s domain name.

‘username’

The subscriber’s username.

‘acctSessionId’

The subscriber’s accounting session identifier.

‘dnis’

The Dialed Number Identification Service (DNIS) number

(or called-party number) dialed by the subscriber.

‘media’

The type of media providing access to the subscriber.

‘mlpNegotiated’

Indicates whether the subscriber session was

established

using multi-link PPP negotiation.

‘protocol’

The type of protocol providing access to the

subscriber.

‘dhcpClass’

The name of the class matching the DHCP DISCOVER

message

received from the subscriber.

‘serviceName’

The name identifying the service associated with the

subscriber.

‘tunnelName’

The name of the VPDN used to carry the subscriber

session.

other = 1
ifIndex = 2
subscriberLabel = 3
macAddress = 4
nativeVrf = 5
nativeIpAddress = 6
domainVrf = 7
domainIpAddress = 8
pbhk = 9
remoteId = 10
circuitId = 11
nasPort = 12
domain = 13
username = 14
acctSessionId = 15
dnis = 16
media = 17
mlpNegotiated = 18
protocol = 19
serviceName = 20
dhcpClass = 21
tunnelName = 22