DOCSIFMIB

Children

class ydk.models.cisco_ios_xe.DOCS_IF_MIB.DOCSIFMIB

Bases: Entity

Class Hierarchy : DOCSIFMIB

This class represents state data.

docsifbaseobjects

type: DocsIfBaseObjects

config: False

docsifcmtsobjects

type: DocsIfCmtsObjects

config: False

docsifdownstreamchanneltable

This table describes the attributes of downstream channels (frequency bands)

type: DocsIfDownstreamChannelTable

config: False

docsifupstreamchanneltable

This table describes the attributes of attached upstream channels

type: DocsIfUpstreamChannelTable

config: False

docsifqosprofiletable

Describes the attributes for each class of service

type: DocsIfQosProfileTable

config: False

docsifsignalqualitytable

At the CM, describes the PHY signal quality of downstream channels. At the CMTS, describes the PHY signal quality of upstream channels. At the CMTS, this table may exclude contention intervals

type: DocsIfSignalQualityTable

config: False

docsifcmmactable

Describes the attributes of each CM MAC interface, extending the information available from ifEntry

type: DocsIfCmMacTable

config: False

docsifcmstatustable

This table maintains a number of status objects and counters for Cable Modems

type: DocsIfCmStatusTable

config: False

docsifcmservicetable

Describes the attributes of each upstream service queue on a CM

type: DocsIfCmServiceTable

config: False

docsifcmtsmactable

Describes the attributes of each CMTS MAC interface, extending the information available from ifEntry. Mandatory for all CMTS devices

type: DocsIfCmtsMacTable

config: False

docsifcmtsstatustable

For the MAC layer, this group maintains a number of status objects and counters

type: DocsIfCmtsStatusTable

config: False

docsifcmtscmstatustable

A set of objects in the CMTS, maintained for each Cable Modem connected to this CMTS

type: DocsIfCmtsCmStatusTable

config: False

docsifcmtsservicetable

Describes the attributes of upstream service queues in a Cable Modem Termination System

type: DocsIfCmtsServiceTable

config: False

docsifcmtsmodulationtable

Describes a modulation profile associated with one or more upstream channels

type: DocsIfCmtsModulationTable

config: False

docsifcmtsmactocmtable

This is a table to provide a quick access index into the docsIfCmtsCmStatusTable. There is exactly one row in this table for each row in the docsIfCmtsCmStatusTable. In general, the management station should use this table only to get a pointer into the docsIfCmtsCmStatusTable (which corresponds to the CM’s RF interface MAC address), and should not iterate (e.g. GetNext through) this table

type: DocsIfCmtsMacToCmTable

config: False

docsifcmtschannelutilizationtable

Reports utilization statistics for attached upstream and downstream physical channels

type: DocsIfCmtsChannelUtilizationTable

config: False

docsifcmtsdownchannelcountertable

This table is implemented at the CMTS to collect downstream channel statistics for utilization calculations

type: DocsIfCmtsDownChannelCounterTable

config: False

docsifcmtsupchannelcountertable

This table is implemented at the CMTS to provide upstream channel statistics appropriate for channel utilization calculations

type: DocsIfCmtsUpChannelCounterTable

config: False