MteReoptTrigger

class ydk.models.cisco_ios_xr.Cisco_IOS_XR_mpls_te_oper.MteReoptTrigger

MteReoptTrigger (Enum Class)

Reoptimization trigger

no_trigger = 0

No trigger

timer_trigger = 1

Timer Trigger

bandwidth_change_trigger = 2

Bandwidth Change Trigger

auto_bandwidth_overflow_trigger = 3

Auto Bandwidth Overflow Trigger

auto_bandwidth_underflow_trigger = 4

Auto Bandwidth Underflow Trigger

auto_bandwidth_adjustment_trigger = 5

Auto Bandwidth Adjustment Trigger

metric_type_change_trigger = 6

Metric Type Change Trigger

user_trigger = 7

User Trigger

frr_trigger = 8

FRR Trigger

remerge_error_trigger = 9

Remerge Error Trigger

preferred_path_trigger = 10

Reception of the preferred path exists path

error

preferred_tree_trigger = 11

Reception of the preferred tree exists path

error

due_to_maximum_metric = 12

Reoptimization triggered due to receiving an

LSA with MAX metric

path_option_switchover_trigger = 13

Path option switchover

path_protection_switchover_trigger = 14

Path Protection Switchover Trigger

iep_enable_reoptimization_trigger = 15

IEP Enable Reoptimization Trigger

affinity_path_verification_fail_trigger = 16

Affinity path verification failure trigger

cost_limit_path_verification_fail_trigger = 17

Cost limit path verification failure trigger

delay_limit_path_verification_fail_trigger = 18

Delay limit path verification failure trigger

soft_preemption_trigger = 19

Soft preemption trigger

iep_changed = 20

Explicit path has changed

po_changed = 21

Path-option has changed

dest_changed = 22

Destination has changed

reopt_try_to_force_it = 23

Reoptimization with try-to-force-it option

topology_change_trigger = 24

Topology change trigger

reopt_link_up_event = 25

Topology link-up event trigger

bfd_session_down_trigger = 26

FRR enabled and BFD session down trigger

reverse_assoc_s2l_received_trigger = 27

Reverse associated S2L received trigger

gmpls_uni_multilayer_trigger = 28

Multilayer recovery for GMPLS-UNI

gmpls_uni_user_trigger = 29

User-triggered GMPLS-UNI reopt request

path_selection_tiebreaker_change_trigger = 30

Path Selection Tiebreaker Change Trigger

sr_egress_path_change_trigger = 31

Segment-Routing Egress Path Change Trigger

overload_bit_trigger = 32

Overload-bit set on current path

pce_trigger = 33

PCE Trigger

lockout_metric_trigger = 34

Reoptimization triggered due to receiving an

LSA with Lockout metric

bfd_session_config_change_trigger = 35

BFD session configuration change

higher_priority_po_change_trigger = 36

Higher priority path option changed

sr_area_spf_support_change_trigger = 37

Segment-Routing IGP Area SPF Support Change

Trigger

path_protection_non_revertive_config_change = 38

Path Protection Non-revertive Configuration

changed

trigger_not_used = 39

Not used