CpwCTDMPerf1DayIntervalEntry¶
-
class
CISCOIETFPWTDMMIB::CpwCTDMPerf1DayIntervalTable::CpwCTDMPerf1DayIntervalEntry¶ Bases:
EntityClass Hierarchy :
CISCOIETFPWTDMMIBCpwCTDMPerf1DayIntervalTableCpwCTDMPerf1DayIntervalEntryThis class represents state data.
An entry is created in this table by the agent
for every entry in the cpwCTDMTable table.
-
cpwvcindex(key)¶ type: int
range: 0..4294967295
refers to:
cpwvcindexconfig: False
-
cpwctdmperf1dayintervalnumber(key)¶ The number of interval, where 1 indicates current day measured period and 2 and above indicate previous days respectively
type: int
range: 0..4294967295
config: False
-
cpwctdmperf1dayintervalvaliddata¶ This variable indicates if the data for this interval is valid
type:
boolconfig: False
-
cpwctdmperf1dayintervalduration¶ The duration of a particular interval in seconds, Adjustments in the system’s time-of-day clock, may cause the interval to be greater or less than, the normal value. Therefore this actual interval value is provided
type: int
range: 0..4294967295
config: False
units: seconds
-
cpwctdmperf1dayintervalmissingpkts¶ Number of missing packets (as detected via control word sequence number gaps)
type: int
range: 0..4294967295
config: False
units: packets
-
cpwctdmperf1dayintervalpktsreorder¶ Number of packets detected out of sequence (via control word sequence number), but successfully re-ordered
type: int
range: 0..4294967295
config: False
units: packets
-
cpwctdmperf1dayintervaljtrbfrunderruns¶ Number of times a packet needed to be played out and the jitter buffer was empty
type: int
range: 0..4294967295
config: False
-
cpwctdmperf1dayintervalmisorderdropped¶ Number of packets detected out of order(via control word sequence numbers), and could not be re-ordered, or could not fit in the jitter buffer
type: int
range: 0..4294967295
config: False
units: packets
-
cpwctdmperf1dayintervalmalformedpkt¶ Number of packets detected with unexpected size, or bad headers’ stack
type: int
range: 0..4294967295
config: False
units: packets
-
cpwctdmperf1dayintervaless¶ The counter associated with the number of Error Seconds encountered
type: int
range: 0..4294967295
config: False
units: seconds
-
cpwctdmperf1dayintervalsess¶ The counter associated with the number of Severely Error Seconds
type: int
range: 0..4294967295
config: False
units: seconds
-
cpwctdmperf1dayintervaluass¶ The counter associated with the number of UnAvailable Seconds. When first entering the UAS state, the number of SES To UAS is added to this object, then as each additional UAS occurs, this object increments by one
type: int
range: 0..4294967295
config: False
units: seconds
-
cpwctdmperf1dayintervalfc¶ This object represents the number of TDM failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared
type: int
range: 0..4294967295
config: False
-